Vögele SP/SFE 13/1 P10 hydraulic flow limiter 24-1072-2051 M6

Description

We offer new, original flow limiter. Flow limiters are used in large oil circulation lubrication systems. The task of a flow limiter is to divide up the volumetric flow of the main line into parallel individual volumetric flow quantities and to “limit” these according to requirements, or to keep them constant.
The volumetric flow generated is independent of the system pressure and nearly indepen-dent of viscosity.
The SP/SMB8 flow limiter was developed specially for mounting plates. The advantage of this design is its simple and compact construc-tion.Using interchangeable plug-in nozzles, the volumetric flow of the flow limiter can be set stepwise from 0.08 to 8 l/min. This also makes subsequent adjustments possible (necessary when the unit is modified, e.g.). Tedious reset-ting and measuring are unnecessary.
General Information:
Brand: Vögele
Model: SP/SFE 13/1 P10
MPN: 24-1072-2051 M6
Country of Manufacture: Germany
Technical Information:
Design
. . . . . . . . . . . . . . .2-way flow limiter
valve
Mounting position
. . . optional (filter always
in upright position!)
Ambient temperature and Lubricant temperature range. . . . . . . 0 to + 100 °C
Material . . . . . . . . . . . . . . . . AlCuPb F38, neutrally anodized
Weight . . . . . . . . . . . . . . . .0.5 kg
Hydraulic
Nominal volumetric
flow . . . . . . . . . . . . . . . . . .stepwise from 0.08 to 8 l/min
(also see related tables on page 7)
working pressure p1
without adaptations . . . . . . . . 5 to 200 bars
E4/E5 with signal
transmitter . . . . . . . . . . . . . . . 5 to 85 bars E6 with proximity switch . . . . 5 to 200 bars
Required differential pressure between≥ 5inputbar pressure p1 and output pressure p3
Lubricant . . . . . . . . . . . mineral oils, syn-thetic oils
and ecological oils
Operating viscosity . . . . . 20 to 600 mm²/s 4)